PMB 200/300

Tiger Bitumen supplies PMB 200/300, a Polymer Modified Bitumen within the EN 14023 nominal penetration range framework, for international road, highway and paving projects. PMB 200/300 is supplied according to the complete designation and standard specified for each project.

What Is PMB 200/300?

PMB 200/300 refers to Polymer Modified Bitumen with a nominal penetration range of 200 to 300 (0.1 mm) at 25°C, the softest penetration range defined for PMB under EN 14023. Bitumen in this range is modified with a polymer to improve flexibility and resistance to cracking at a very soft consistency, while retaining the performance benefits of polymer modification.

PMB 200/300 and EN 14023 Designation

Under EN 14023, 200/300 is a nominal penetration range rather than a complete grade designation on its own. A complete PMB designation combines this penetration range with the applicable minimum softening-point class specified for the project. The applicable softening-point class for PMB 200/300 is confirmed against the project specification and quotation requirements.

PMB 200/300 Specification Parameters

The penetration range is fixed by the 200/300 designation. The applicable softening-point class and declared performance properties depend on the complete EN 14023 designation and project specification. The exact designation and applicable values are confirmed against the customer’s project requirements at the quotation stage.

PMB 200/300 Applications

Internationally, the 200/300 penetration range is the softest defined under EN 14023 and is used where a very soft, highly flexible modified binder is required, including pavements and applications in climates with significant low-temperature demands. Exact application suitability should be confirmed against the complete designation and the project’s specification.

Packaging and Export Supply

PMB 200/300 is supplied primarily in new steel drums. Where a project specifically requires bag packaging, PMB 200/300 can also be supplied in 1 Metric Ton (1,000 kg) PP woven bags in a steel cage, subject to confirmation for the specific grade and order. Tiger Bitumen’s packaging facility is located in the Karachi Export Processing Zone, close to Port Qasim and Karachi Port, supporting container export through Pakistan’s major ports. See our drum and jumbo bag packing page for details.

TDS, COA and Inspection

Tiger provides a PMB 200/300-specific Technical Data Sheet and a shipment-specific Certificate of Analysis matched to the confirmed grade and project specification. Third-party inspection through SGS or Bureau Veritas can be arranged where required by the buyer or project.

Why Source PMB 200/300 from Tiger Bitumen

Tiger Bitumen is expanding its product range to offer PMB across the full EN 14023 nominal penetration range, including PMB 200/300, supplied according to each project’s specification. Export operations are based in the Karachi Export Processing Zone, with direct access to Port Qasim and Karachi Port for international shipments, and shipments can be arranged for third-party inspection through SGS or Bureau Veritas. Lead time and available quantity for PMB 200/300 are confirmed at the quotation stage. See our full Polymer Modified Bitumen (PMB) range or read more about Tiger Bitumen.

Frequently Asked Questions

Request a PMB 200/300 Quotation

To request a quotation for PMB 200/300, send us the complete designation or standard your project specifies, the quantity required, preferred packing, destination port, and Incoterm. Get a Quotation → · See our full Polymer Modified Bitumen range.